Posital Vietnam, UCD-IPT00-XXXXX-B4P0-PAL, Bộ mã hóa tăng dần UCD-IPT00-XXXXX-B4P0-PAL, Đại lý Posital Vietnam

 

Interface Programmable Incremental
Programming Functions PPR (1-16384), Output, Counting Direction
Configuration Tool UBIFAST Configuration Tool (Version ≥ 1.6.3)
Outputs  
Output Driver RS 422 (TTL)
Output Voltage High Level Push-Pull (HTL) > 4 V @ 4.75-9 V Supply Voltage
> V-3 V @ 9-30 V Supply Voltage
Output Voltage Low Level Push-Pull (HTL) < 0.5 V
Output Voltage High Level RS422 (TTL) > 4 V
Output Voltage Low Level RS422 (TTL) < 0.5 V
Maximum Frequency Response 1 MHz
Maximum Switching Current 50 mA per Channel
Electrical Data  
Supply Voltage 4.75 – 30 VDC
Current Consumption ≤140mA @ 5V DC, ≤70mA @ 10V DC, ≤40mA @ 24V DC
Power Consumption ≤ 1.0 W
Start-Up Time < 1 s
Min. Load Resistance 120 Ω
Reverse Polarity Protection Yes
Short Circuit Protection Yes
EMC: Emitted Interference DIN EN 61000-6-4
EMC: Noise Immunity DIN EN 61000-6-2
MTTF 280 years @ 40 °C
Sensor  
Technology Magnetic
Accuracy (INL) ±0.0878° (≤ 12 bit)
Duty Cycle 180° ± 27° (Speed > 100RPM)
Phase Angle 90° ± 14° (Speed > 100RPM)
Environmental Specifications  
Protection Class (Shaft) IP65
Protection Class (Housing) IP65
Operating Temperature -40 °C (-40 °F) - +85 °C (+185 °F)
Humidity 98% RH, no condensation
Mechanical Data  
Mechanical Data  
Housing Material Steel
Housing Coating Wet coating (RAL 9006 White Aluminium) + Cathodic corrosion protection (>720 h salt spay resistance)
Flange Type Clamp, 2.5" (ø 63.5 mm, 5)
Flange Material Aluminum
Shaft Type Solid, Single Flat, Length = 22.4 mm
Shaft Diameter ø 6.35 mm (1/4")
Shaft Material Stainless Steel V2A (1.4305, 303)
Max. Shaft Load Axial 40 N, Radial 110 N
Rotor Inertia ≤ 30 gcm² [≤ 0.17 oz-in²]
Friction Torque ≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F)
Max. Permissible Mechanical Speed ≤ 12000 1/min
Shock Resistance ≤ 100 g (half sine 6 ms, EN 60068-2-27)
Permanent Shock Resistance ≤ 10 g (half sine 16 ms, EN 60068-2-29)
Vibration Resistance ≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6)
Length 92,2 mm (3.63")
Weight 210 g (0.46 lb)
Minimum Mechanical Lifetime
(10^8 revolutions with Fa/Fr)
430 (20 N / 40 N), 150 (40 N / 60 N), 100 (40 N / 80 N), 55 (40 N / 110 N)
Electrical Connection  
Connection Orientation Axial
Connector M23, Male, 12 pin, CCW / left
Certification  
Approval CE + cULus
Product Life Cycle  
Product Life Cycle Lab Sample

Connection Plan  
SIGNAL PIN NUMBER
Power Supply 12
GND 10
A 5
/A 6
B 8
/B 1
Z 3
/Z 4
Shielding Connector housing
Connector-View on Encoder

 

Pulse Diagram

 

Rotation Clockwise (seen on shaft)
 
Dimensional Drawing

 

drawing-mcd-b4p0-q5a-n.png

drawing-mc-5-ca-322-sws-z1bnnn-n-pal-n.png

2D Drawing

The picture and drawing are for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings. All dimension in [inch] mm.

© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.