Posital Vietnam, LD0-S401G-1212-AH90-2RW, Cảm biến tuyến tính LD0-S401G-1212-AH90-2RW, Đại lý Posital Vietnam

 

General Data  
Supply Voltage 4.5 – 30 VDC
Power Consumption ≤ 1.5 W
Turn On Time < 1 s
Operating Temperature -20 °C (-4 °F) - +80 °C (+176 °F)
Weight 3235 g (7.13 lb)
Protection Class (Encoder) IP64 / IP65
EMC: Emitted Interference DIN EN 61000-6-4
EMC: Noise Immunity DIN EN 61000-6-2
Mechanical Data  
Max. Measurement Length 10.00 m (32.81')
Length per Revolution 315 mm
Wire Material Coated Polyamide Stainless Steel
Wire Diameter 1.00 mm
Encoder Housing Material Steel
Draw Wire Housing Material Aluminum
Max. Speed of Wire Displacement 2.0 m / s
Max. Wire Acceleration 6.0 g
Max. Extension Force 21.0 N
Min. Retraction Force 8.0 N
Actuation Lifetime 0.5 mio Cycles
Wire Mounting Eyelet
Max. Wire Exit Angle ±3°
Sensor Data  
Technology Optical (≤ 0.02°)
Accuracy ±0.01 % FSO
Repeatability ±0.001 % FSO
Resolution [Encoder - Singleturn] 12 bit
Resolution [Encoder - Multiturn] 12 bit
Approx. Linear Resolution 76.9 µm
Output Code Gray
Interface  
Communication Interface SSI with Button and LEDs
Diagnostics OptoAsic, Memory, LED
Manual Functions Preset via push button and cable or connector
Cycle Time Interface ≥ 25 µs
Outputs  
Output Driver RS422
Clock Input RS 422, via Optocoupler
Clock frequency 100 kHz – 2 MHz
Reverse Polarity Protection Yes
Short Circuit Protection Yes
MTTF 16.2 years @ 40 °C
Electrical Connection  
Connection Orientation Radial
Connection Orientation (w.r.t Draw Wire) Radial 9
Cable Length 2 m [79"]
Wire Cross Section 0.14 mm² / AWG 26
Material / Type PVC
Cable Diameter 6 mm (0.24 in)
Minimum Bend Radius 46 mm (1.81") fixed, 61 mm (2.4") flexing
Product Life Cycle  
Product Life Cycle Established
Connection Plan  
SIGNAL CABLE COLOR
Power Supply Brown
GND White
Data+ Gray
Data- Pink
Clock+ Green
Clock- Yellow
Preset Blue
DIR Red
Shielding Shield
 
Dimensional Drawing

 

drawing-h-5-crb-sx-cx-.png

2D Drawing

All dimension in [inch] mm. Encoder dimensions may vary depending on electrical interface and connector. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.

© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.