GFI70 300, GFI70 300 Lamtec, Đại lý Lamtec tại Việt Nam

Đại lý Lamtec tại Việt Nam

Fuel: natural gas, LPG (liquid propane gas), coke gas, refinery gas

Thermal power up to 3MW in special design up to 6MW

Flame length up to 3m

Intermittent- or continuous operation

SIL 3 certified

Protection class IP 65

Available for hazardous Areas

Supply voltage: 220 - 230 VAC (-15/+10 %). 50/60 Hz
120 – 127 VAC (-15/+10 %). 50/60 Hz
Ignition voltage: 8 kV
Power consumption: 100 VA ignition transformer
≤10 KV flame scanner
Electrical connection: Plug with mating caonnector (standard)
Plug with mating connector with pre-assembled cable
Cable permanently connected
Cable length: 2 m – 100 m, Standard = 5 m
IP protection: IP 65/IP 67
Housing: Sea water resistant aluminium (standard)
stainless steel (1.4301/1.4571)
Coating: Non (standard)
C2/C4 painting (option)
Tube length:

240 – 6.000 mm

Tube: Stainless steel 1.4301, heat resistant end tube1.4841 (standard)
Stainless steel 1.4571 heat resistant end tube 1.4841 (option)
Fuel gas: Natural gas, propane/butane (standard) coke oven gas, refinery gas (option)
Fuel gas supply pressure: 50 – 200 mbar above combustion pressure (standard) Orifice for higher pressure (option)
Air suppl pressurer: Depending on the size
Cooling air flow: Depending on the size, at least 50 % of combustion air flow

Approvals:

   

      

For SIL 3 flame monitoring device F130I:

2009/142/EC
2014/68/EU
SIL 3